Home / Eltek APP
ELTEK APP
The ELTEK APP has been developed exclusively for E-WATERBLOCK smart leak and water-block detectors. It comes equipped with a simple and intuitive interface, a 12-month consumption history and real-time data on water usage, thanks to Bluetooth® technology.
Download the ELTEK APP on your smartphone now and configure the application for smart management of the E-WATERBLOCK!
STANDARD OPERATION MODE
The ELTEK APP control panel: standard operation mode
To ensure that the device is controlling the normal water consumption per load, the ELTEK APP control panel monitors two parameters:
- flow per minute, from a minimum of 0.5 liters/minute to a maximum of 20 liters/minute for each load;
- total volume consumed by the device.
STANDARD OPERATION MODE
The ELTEK APP control panel: water-block mode for overflows
The E-WATERBLOCK blocks the flow when excessive water is drawn in a machine load compared to a normal machine load (in terms of volume, total liters). For example, if a washing machine normally draws 10 to 14 liters of water on each fill, once 14 liters are exceeded, an anomaly is signaled and E-WATERBLOCK prevents and blocks the over-fill.
ANOMALY DETECTION
The ELTEK APP control panel: leak detector mode for underflows
When the device draws fewer liters per minute than the permitted limit, it means that there is a leak.
At this point, E-WATERBLOCK immediately signals the anomaly, allowing for quick troubleshooting.
MULTIPLE DEVICES CONTROL
ELTEK APP settings – The ability to connect and rename as many devices as needed
The ELTEK APP allows the ability to modify preset profiles – all of which can be custom-configured.
If multiple devices are listed, you can also rename each device so that it can be identified immediately.